Burstable T3

“When the top T3 providers must compete for your business, you win!”
Burstable T3  
Home
Burstable T3 is ideal for businesses which commonly need far less than a full T3/DS3 (45 mbps), but occasionally have surges in bandwidth usage which approach a full T3. Burstable T3 is efficient for these companies because they are only billed for the average bandwidth used. (For more about burstable T3 please click here)

Burstable T3 Quotes and Availability!
Service Type:
Your Name:
Company:
Email:
Installation Phone Number:() -

Bonded T1 or DS3?

Low Price Guarantee

Live Sales Support

Featured Article - The advantages of bonded T1 compared to the advantages of DS3.

More Info

Put our GeoQuote software to work for you and find the best value from over 30 carriers. We guarantee the best prices.

More Info

Call (888) 804-6720 to speak with a live broadband specialistwithout obligation or sales pitch. We'll give it to you straight.

Burstable T3 Service Providers

ACCAirespringAT&TBroadskyCovad
Level3MegapathNewedgeNetwork InnovationsNuvox
One CommunicationsPNGQwestSpliceTelepacific
TelnesTime Warner TelecomUCNUSLECXO

With burstable T3, pricing is based on the average of past transmission rates, usually at the 95th percentile. When this averaged bandwidth rate is exceeded, the bill is adjusted for that specific billing period. If a company has predictable bandwidth usage however, then fractional t3/ds3, bonded t1, or full t3 can be more efficient. (Click here to return to top of page)

For details on any T1 related service, click on the service listed below.

Bonded DS1 | Bonded T1 | Bonded T3 | Buy T1 | Burstable T1 | Burstable T3 | Business T1 | Channelized DS1
Channelized DS3 | Channelized T1 | Data T3 | Dedicated Line | Dedicated T1 | Dedicated VPN | DS1 Data
DS1 Line | DS1 Prices | DS1 Providers | DS1 Voice | DS3 Network | DS3 Prices | DS3 Providers | DS3 Quotes
Dynamic T1 | Fractional DS1 | Fractional T1 | Fractional DS3 | Frame Relay Quotes | Frame Relay T1
Integrated DS1 | Integrated T1 | Integrated T1 PRI | Local Voice T1 | MPLS Network | MPLS T1 | MPLS VPN
Multiprotocol Label Switching | OC3 Quotes | OC3 Prices | Point-to-Point Quotes | Point-to-Point T1 | PRI T1
Price T1 | Price T3 | Purchase T1 | T1-T3 | T1 Business | T1-DS1 | T1 Consultation | T1 Data | T1 Dedicated
T1 Frame Relay | T1 Information | T1 Integrated | T1 Los Angeles | T1 MPLS | T1 New York | T1 PRI
T1 Providers | T1 Voice | T1 VOIP | Telecommunication US | T3 DS3 | T3 Cost | T3 PRI | T3 Quotes | T3 Rates
Virtual Private Networks | Videoconferencing T1 | Voice T3 | SIP T1 | Class of Service | Bonded T1 MPLS
Ethernet over Copper | Colocation Services | Fixed Wireless |

© 2005 burstable-t3.info - All Rights Reserved





 Is PRI the Right Choice for Your Company?

Written by: Dennis Green - Jul 24, 2008


PRI (Primary Rate Interface) is an ISDN connection designed to be provided over T1 lines. In the United States, a PRI line consists of 24 (64 kbps each) DS0 channels. PRI T1 lines are commonly configured so that 23 channels serve as B (Bearer) channels and one as a D (delta) channel. Each B channel serves as a voice (telephone) channel. The D channel provides control and signaling information for the B channels. B channels can be used as independent channels to simultaneously provide a variety of services such as internet, voice, or imaging. They also have the flexibility to be bonded, as needed, to provide higher bandwidth for special needs such as video conferencing. A significant difference between PRI T1 and traditional integrated T1 is that T1s which are not PRI require a portion of each channel to be allocated for signaling functions. This results in a reduction in effectiveness, efficiency, potential and bandwidth for most functions of each channel of non-PRI T1. With T1 PRI, all signaling functions are provided by the 24th channel. This leaves each of the other 23 channels with a full 64 kbps, which can be fully dedicated to bearer functions. One D channel can provide signaling functions for several other PRI lines. It is not uncommon for two D channels (one as primary, one for backup) to provide the signaling functions for a span of as many as 20 PRI T1 lines. This frees the 24th channel of each of the other PRI lines so that they can be used as additional bearer channels. Because PRI lines serve as a direct connection to the telephone company’s central office, PRI is often the preferred choice of PBX customers. PRI T1 provides many advantages over traditional voice T1. These include: call by call service selection, more PBX users can be supported, caller ID, DID (direct inward dial) numbers, messaging, and video conferencing. Because of increased efficiency provided by PRI, companies which switch to PRI from traditional voice T1 often find that they not only receive a much greater variety of services but often do not need to pay for as many trunks as they needed prior to the change. PRI T1 is available in most major metropolitan areas, but is not available in most isolated rural areas. To assess availability and pricing for your location, use the tool at the top of this page or on our home page. This tool will provide real-time answers, it’s free, easy to use, and there is no obligation. (Click here to return to top of page)